your home for end-user virtualization!
PureFlex
Installing IBM SmartCloud Entry 2.3 for VMware vCenter
To install IBM SmartCloud Entry 2.3 for VMware vCenter, you must have a non-vCenter Windows or Linux server to host the application on. **You cannot install SmartCloud Entry on a vCenter server by default due to a TCP port conflict. Run the SmartCloudEntry 2.3 Trial installer Select Language (English), click Ok Click Next Click I accept […]
Tags: IBM, SmartCloud, Vcenter, vmware
Posted in Cloud, IBM, PureFlex, vmware | 1 Comment »
Backing up the IBM PureFlex Flex Systems FC3171 8GB Fibre Channel SAN Switch
IBM has made backing up the Backing up the IBM PureFlex Flex Systems FC3171 8GB Fibre Channel SAN Switch quite easy. In fact, it can be done in just a few short steps. To do this, log into the Flex System FIbre Channel Switch In our case https://172.16.161.122 Log in using your credentials Go to Switch […]
Tags: AMM, FlexSystem, FSM, IBM, PureFlex
Posted in PureFlex | No Comments »
Backing up the IBM PureFlex Flex Systems EN4093 10GB Ethernet Switch
IBM has made backing up the IBM PureFlex Flex Systems EN4093 10GB Ethernet Switch quite easy. In fact, it can be done in just a few short steps. Log into the Flex System network switch In our case https://172.16.160.120 Click Dump The configuration is then opened into a new tab You can then copy and paste this […]
Tags: FlexSystem, IBM, PureFlex
Posted in PureFlex | 4 Comments »
IBM FlexSystems AIX VMControl Virtual Appliance hanging
The system boot hangs at “the biod subsystem has been started” for around 10-15 minutes before booting all the way. The fix for this is to run the following command: smit rmnfs Set NFS to stop now and at reboot Then do a system reboot and the system should boot normally.
Posted in AIX, PureFlex | No Comments »